ESET researchers uncover a new wiper that attacks Ukrainian organizations and a worm component that spreads HermeticWiper in local networks
As the recent hostilities started between Russia and Ukraine, ESET researchers discovered several malware families targeting Ukrainian organizations.
- On February 23rd, 2022, a destructive campaign using HermeticWiper targeted multiple Ukrainian organizations.
- This cyberattack preceded, by a few hours, the start of the invasion of Ukraine by Russian Federation forces
- Initial access vectors varied from one organization to another. We confirmed one case of the wiper being dropped by GPO, and uncovered a worm used to spread the wiper in another compromised network.
- Malware artifacts suggest that the attacks had been planned for several months.
- On February 24th, 2022, a second destructive attack against a Ukrainian governmental network started, using a wiper we have named IsaacWiper.
- ESET Research has not yet been able to attribute these attacks to a known threat actor.
Destructive attacks in Ukraine
As stated in this ESETResearch tweet and WLS blogpost, we uncovered a destructive attack against computers in Ukraine that started around 14:52 on February 23rd, 2022 UTC. This followed distributed denial-of-service (DDoS) attacks against major Ukrainian websites and preceded the Russian military invasion by a few hours.
These destructive attacks leveraged at least three components:
- HermeticWiper: makes a system inoperable by corrupting its data
- HermeticWizard: spreads HermeticWiper across a local network via WMI and SMB
- HermeticRansom: ransomware written in Go
HermeticWiper was observed on hundreds of systems in at least five Ukrainian organizations.
On February 24th, 2022, we detected yet another new wiper in a Ukrainian governmental network. We named it IsaacWiper and we are currently assessing its links, if any, with HermeticWiper. It is important to note that it was seen in an organization that was not affected by HermeticWiper.
At this point, we have not found any tangible connection with a known threat actor. HermeticWiper, HermeticWizard, and HermeticRansom do not share any significant code similarity with other samples in the ESET malware collection. IsaacWiper is still unattributed as well.
HermeticWiper and HermeticWizard are signed by a code-signing certificate (shown in Figure 1) assigned to Hermetica Digital Ltd issued on April 13th, 2021. We requested the issuing CA (DigiCert) to revoke the certificate, which it did on February 24th, 2022.
According to a report by Reuters, it seems that this certificate was not stolen from Hermetica Digital. It is likely that instead the attackers impersonated the Cypriot company in order to get this certificate from DigiCert.
ESET researchers assess with high confidence that the affected organizations were compromised well in advance of the wiper’s deployment. This is based on several facts:
- HermeticWiper PE compilation timestamps, the oldest being December 28th, 2021
- The code-signing certificate issue date of April 13th, 2021
- Deployment of HermeticWiper through GPO in at least one instance suggests the attackers had prior access to one of that victim’s Active Directory servers
The events are summarized in the timeline in Figure 2.
The initial access vector is currently unknown but we have observed artifacts of lateral movement inside the targeted organizations. In one entity, the wiper was deployed through the default domain policy (GPO), as shown by its path on the system:
This indicates that attackers likely took control of the Active Directory server.
In other instances, it is possible that Impacket was used to deploy HermeticWiper. A Symantec blogpost states that the wiper was deployed using the following command line:
cmd.exe /Q /c move CSIDL_SYSTEM_DRIVE\temp\sys.tmp1 CSIDL_WINDOWS\policydefinitions\postgresql.exe 1> \\127.0.0.1\ADMIN$\__1636727589.6007507 2>&1
The last part is the same as the default behavior in Impacket’s wmiexec.py, found on GitHub.
Finally, a custom worm that we have named HermeticWizard was used to spread HermeticWiper across the compromised networks via SMB and WMI.
The initial access vector is also currently unknown. It is likely that attackers used tools such as Impacket to move laterally. On a few machines, we have also observed RemCom, a remote access tool, being deployed at the same time as IsaacWiper.
HermeticWiper is a Windows executable with four drivers embedded in its resources. They are legitimate drivers from the EaseUS Partition Master software signed by CHENGDU YIWO Tech Development Co., and they implement low-level disk operations. The following files were observed:
- 0E84AFF18D42FC691CB1104018F44403C325AD21: x64 driver
- 379FF9236F0F72963920232F4A0782911A6BD7F7: x86 driver
- 87BD9404A68035F8D70804A5159A37D1EB0A3568: x64 XP driver
- B33DD3EE12F9E6C150C964EA21147BF6B7F7AFA9: x86 XP driver
Depending on the operating system version, one of those four drivers is chosen and dropped in C:\Windows\System32\drivers\<4 random letters>.sys. It is then loaded by creating a service.
HermeticWiper then proceeds by disabling the Volume Shadow Copy Service (VSS) and wipes itself from disk by overwriting its own file with random bytes. This anti-forensic measure is likely intended to prevent the analysis of the wiper in a post-incident analysis.
It is interesting to note that most of the file operations are performed at a low level using DeviceIoControl calls.
The following locations are overwritten with random bytes generated by the Windows API function CryptGenRandom:
- The master boot record (MBR)
- The master file table (MFT)
- $Bitmap and $LogFile on all drives
- The files containing the registry keys (NTUSER*)
In addition, it also recursively wipes folders and files in Windows, Program Files, Program Files(x86), PerfLogs, Boot, System Volume Information, and AppData folders, using a FSCTL_MOVE_FILE operation. This technique appears to be quite unusual and very similar to what is implemented in the Windows Wipe project on GitHub (see the wipe_extent_by_defrag function). It also wipes symbolic links and big files in My Documents and Desktop folders by overwriting them with random bytes.
Finally, the machine is restarted. However, it will fail to boot, because the MBR, the MFT, and most files were wiped. We believe it is not possible to recover the impacted machines.
Looking for other samples signed by the same code-signing certificate (Hermetica Digital Ltd), we found a new malware family that we named HermeticWizard.
It is a worm that was deployed on a system in Ukraine at 14:52:49 on February 23rd, 2022 UTC. It is a DLL file developed in C++ that exports the functions DllInstall, DllRegisterServer, and DllUnregisterServer. Its export DLL name is Wizard.dll. It contains three resources, which are encrypted PE files:
- A sample of HermeticWiper (912342F1C840A42F6B74132F8A7C4FFE7D40FB77)
- exec_32.dll, responsible for spreading to other local computers via WMI (6B5958BFABFE7C731193ADB96880B225C8505B73)
- romance.dll, responsible for spreading to other local computers via SMB (AC5B6F16FC5115F0E2327A589246BA00B41439C2)
The resources are encrypted with a reverse XOR loop. Each block of four bytes is XORed with the previous block. Finally, the first block is XORed with a hardcoded value, 0x4A29B1A3.
HermeticWizard is started using the command line regsvr32.exe /s /i <path>.
First, HermeticWizard tries to find other machines on the local network. It gathers known local IP addresses using the following Windows functions:
- WNetOpenEnumW(RESOURCE_GLOBALNET, RESOURCETYPE_ANY)
It then tries to connect to those IP addresses (and only if they are local IP addresses) to see if they are still reachable. In case the -s argument was provided when HermeticWizard was started (regsvr32.exe /s /i:-s <path>), it also scans the full /24 range. So, if 192.168.1.5 was found in, for example, the DNS cache, it incrementally scans from 192.168.1.1 to 192.168.1.254. For each IP address, it tries to open a TCP connection on the following ports:
- 20: ftp
- 21: ftp
- 22: ssh
- 80: http
- 135: rpc
- 137: netbios
- 139: smb
- 443: https
- 445: smb
The ports are scanned in a random order so it’s not possible to fingerprint HermeticWizard traffic that way.
When it has found a reachable machine, it drops the WMI spreader (detailed below) on disk and creates a new process with the command line rundll32 <current folder>\<6 random letters>.ocx #1 -s <path to HermeticWizard> – i <target IP>.
It does the same with the SMB spreader (detailed below) that is also dropped in <current folder>\<6 random letters>.ocx, but with different random letters.
Finally, it drops HermeticWiper in <current folder>\<6 random letters>.ocx and executes it.
The WMI spreader, named by its developers exec_32.dll, takes two arguments:
- -i: The target IP address
- -s: The file to copy and execute on the target machine
First, it creates a connection to the remote ADMIN$ share of the target using WNetAddConnection2W. The file provided in the -s argument is then copied using CopyFileW. The remote file has a random name generated with CoCreateGUID (e.g., cB9F06408D8D2.dll) and the string format c%02X%02X%02X%02X%02X%02X.
Second, it tries to execute the copied file, HermeticWizard, on the remote machine using DCOM. It calls CoCreateInstance with CLSID_WbemLocator as argument. It then uses WMI Win32_Process to create a new process on the remote machine, with the command line C:\windows\system32\cmd.exe /c start C:\windows\system32\\regsvr32.exe /s /i C:\windows\<filename>.dll.
Note that the -s argument is not passed to HermeticWizard, meaning that it won’t scan the local network again from this newly compromised machine.
If the WMI technique fails, it tries to create a service using OpenRemoteServiceManager with the same command as above.
If it succeeds in executing the remote DLL in any way, it sleeps until it can delete the remote file.
The SMB spreader, named by its developers romance.dll, takes the same two arguments as the WMI spreader. Its internal name is likely a reference to the EternalRomance exploit, even if it does not use any exploit.
First it attempts to connect to the following pipes on the remote SMB share (on port 445):
These are pipes known to be used in lateral movement. The spreader has a list of hardcoded credentials that are used in attempts to authenticate via NTLMSSP to the SMB shares:
— usernames —
— passwords —
This list of credentials is surprisingly short and is unlikely to work in even the most poorly protected networks.
If the connection is successful, it attempts to drop, to the target ADMIN$ share, the file referenced by the -s argument. As for the WMI spreader, the remote filename is generated by a call to CoCreateInstance.
It then executes, via SMB, the command line cmd /c start regsvr32 /s /i ..\\<filename> & start cmd /c \”ping localhost -n 7 & wevtutil cl System\”.
ESET researchers also observed HermeticRansom – ransomware written in Go – being used in Ukraine at the same time as the HermeticWiper campaign. HermeticRansom was first reported in the early hours of February 24th, 2022 UTC, in a tweet from AVAST. Our telemetry shows a much smaller deployment compared to HermeticWiper. This ransomware was deployed at the same time as HermeticWiper, potentially in order to hide the wiper’s actions. On one machine, the following timeline was observed:
- 2022-02-23 17:49:55 UTC: HermeticWiper in C:\Windows\Temp\cc.exe deployed
- 2022-02-23 18:06:57 UTC: HermeticRansom in C:\Windows\Temp\cc2.exe deployed by the netsvcs service
- 2022-02-23 18:26:07 UTC: Second HermeticWiper in C:\Users\com.exe deployed
On one occasion, we observed HermeticRansom being deployed through GPO, just like HermeticWiper:
A few strings were left in the binary by the attackers; they reference US President Biden and the White House:
Once files are encrypted, the message in Figure 3 is displayed to the victim.
IsaacWiper is found in either a Windows DLL or EXE with no Authenticode signature; it appeared in our telemetry on February 24th, 2022. As mentioned earlier, the oldest PE compilation timestamp we have found is October 19th, 2021, meaning that if its PE compilation timestamp was not tampered with, IsaacWiper might have been used in previous operations months earlier.
For DLL samples, the name in the PE export directory is Cleaner.dll and it has a single export _Start@4.
We have observed IsaacWiper in %programdata% and C:\Windows\System32 under the following filenames:
It has no code similarity with HermeticWiper and is way less sophisticated. Given the timeline, it is possible that both are related but we haven’t found any strong connection yet.
IsaacWiper starts by enumerating the physical drives and calls DeviceIoControl with the IOCTL IOCTL_STORAGE_GET_DEVICE_NUMBER to get their device numbers. It then wipes the first 0x10000 bytes of each disk using the Mersenne Twister pseudorandom generator. The generator is seeded using the GetTickCount value.
It then enumerates the logical drives and recursively wipes every file of each disk with random bytes also generated by the Mersenne Twister PRNG. It is interesting to note that it recursively wipes the files in a single thread, meaning that it would take a long time to wipe a large disk.
On February 25th, 2022, attackers dropped a new version of IsaacWiper with debug logs. This may indicate that the attackers were unable to wipe some of the targeted machines and added log messages to understand what was happening. The logs are stored in C:\ProgramData\log.txt and some of the log messages are:
- getting drives…
- start erasing physical drives…
- –– start erasing logical drive
- start erasing system physical drive…
- system physical drive –– FAILED
- start erasing system logical drive
This report details a destructive cyberattack that impacted Ukrainian organizations on February 23rd, 2022, and a second attack that affected a different Ukrainian organization from February 24th through 26th, 2022. At this point, we have no indication that other countries were targeted.
However, due to the current crisis in Ukraine, there is still a risk that the same threat actors will launch further campaigns against countries that back the Ukrainian government or that sanction Russian entities.
A list of IoCs can also be found in our GitHub repository.
For any inquiries about our research published on WeLiveSecurity, please contact us at firstname.lastname@example.org.
ESET Research now also offers private APT intelligence reports and data feeds. For any inquiries about this service, visit the ESET Threat Intelligence page.
|SHA-1||Filename||ESET detection name||Description|
|23873BF2670CF64C2440058130548D4E4DA412DD||XqoYMlBX.exe||Win32/RiskWare.RemoteAdmin.RemoteExec.AC||Legitimate RemCom remote access tool|
MITRE ATT&CK techniques
This table was built using version 10 of the MITRE ATT&CK framework.
|Resource Development||T1588.002||Obtain Capabilities: Tool||Attackers used RemCom and potentially Impacket as part of their campaign.|
|T1588.003||Obtain Capabilities: Code Signing Certificates||Attackers acquired a code-signing certificate for their campaigns.|
|Initial Access||T1078.002||Valid Accounts: Domain Accounts||Attackers were able to deploy wiper malware through GPO.|
|Execution||T1059.003||Command and Scripting Interpreter: Windows Command Shell||Attackers used the command line during their attack (e.g., possible Impacket usage).|
|T1106||Native API||Attackers used native APIs in their malware.|
|T1569.002||System Services: Service Execution||HermeticWiper uses a driver, loaded as a service, to corrupt data.|
|T1047||Windows Management Instrumentation||HermeticWizard attempts to spread to local computers using WMI.|
|Discovery||T1018||Remote System Discovery||HermeticWizard scans local IP ranges to find local machines.|
|Lateral Movement||T1021.002||Remote Services: SMB/Windows Admin Shares||HermeticWizard attempts to spread to local computers using SMB.|
|T1021.003||Remote Services: Distributed Component Object Model||HermeticWizard attempts to spread to local computers using WbemLocator to remotely start a new process via WMI.|
|Impact||T1561.002||Disk Wipe: Disk Structure Wipe||HermeticWiper corrupts data in the system’s MBR and MFT.|
|T1561.001||Disk Wipe: Disk Content Wipe||HermeticWiper corrupts files in Windows, Program Files, Program Files(x86), PerfLogs, Boot, System Volume Information, and AppData.|
|T1485||Data Destruction||HermeticWiper corrupts user data found on the system.|
|T1499.002||Endpoint Denial of Service: Service Exhaustion Flood||By using DDoS attacks, the attackers made a number of government websites unvailable.|